Middle section cable coiling machine

1250mm No-axis pay-off stand
Suitable for wire diameter :￠800-￠1250mm；
Suitable for cable:10mm2-70 mm2(tough structure)，10 mm2-95mm2(soft structure)；
Speed of wire feeding:0-150m/min； Load carrying capacity: 3T；
Open and close way: manual operation; Lifting way: motor lifting and both of sides have cantilever up and down bobbin
Brake way: magnetic powder tension brake; European high-precision meter counter
Four wheel caterpillar type; Max. wire speed : 500mm/min
Test cable range: 2-40mm; Measurement accuracy: 0.1﹪(one thousandth)
Elastic way: manual air pressure
Induction way: rotary encoder
Winding mode: Automatic winding;
Rotation speed of principle machine: 0-200 R/min;
Outside diameter of cable band: 《=Φ650mm;
Number of cable band slots: 3 slots;
Power of motor: 5HP Variable frequency control;
Inside diameter of cable band: Φ200mm(based on the client requirements);
Height of cable band: 60-150mm;
Scope of Application: Suitable for BV10-70mm2 wire coiling production

Main Technical specifications:

1. Pay-off: No-axis pay-off (￠1000-￠1400 or end-axis pay-off ￠1250-￠1600)2. Measurement accuracy: 0.1﹪(one thousandth)
3. 0-200 R/min, main machine power: 5HP(3.7kw)
4. Suitable range: 10-70 mm2 single wire and wire diameter less than 20mm round jacketing coiling and traverse